A long wood workstation console can connect several barber stations along one wall and give a shop a consistent look. Start with the wall and the way barbers work: measure the usable run, position each station, then decide how the counter will be supported and what it needs to hold. The final design and price depend on the project.
Cover image: AI-generated design visualization, not a completed installation.
Map the wall before choosing a console
Measure the finished wall at more than one height and record the available length, proposed counter depth and finished height. Mark doors, windows, baseboards, existing outlets, switches, sinks and any uneven areas. Leave the dimensions of fixed obstructions visible on the drawing rather than subtracting them from memory.
Next, draw the chairs, mirrors and work positions. Check how people enter, move between stations and reach their tools. A plan view and a front elevation help the maker and installer see different parts of the same layout.
A simple planning example: a 108-inch wall with three stations gives a 36-inch average per station on paper. This is only a starting calculation—not a recommended station width. Ends, chair movement, adjacent fixtures and local requirements may require a different layout.
Choose a continuous run or separate sections
A continuous-looking counter gives the room one clean horizontal line. Depending on the total length, access and construction, the piece may need more than one section. A segmented arrangement can also make it easier to work around columns or a change in wall depth. Ask how joints and grain direction will be handled before approving the design.
Decide whether you want an open counter surface, cabinets, drawers or a combination. List the tools and products you want to store, their approximate dimensions and expected weight. A space for clippers or cables needs a specific plan; it should not be assumed from an interior image.
Review support, wood and finish
A floating appearance still needs adequate support. Tell your installer and maker what the wall is made of, where structural support is available and what the console is expected to carry. Cabinetry, spans, brackets and fasteners must be reviewed for the actual design and wall. Drywall alone should not be treated as structural support.
Walnut can provide a rich, dark natural tone; oak offers a lighter starting point. Natural grain and color vary from board to board. Discuss the finish with the maker, including the products and cleaning routine expected in the shop. Request a sample or confirm the finish process if appearance or maintenance is important to your project.
Coordinate mirrors, power and plumbing
Locate mirrors, lighting, outlets and any sinks on the same elevation. If you need cable openings or recesses, identify their position and size before the final design is quoted. Electrical work, plumbing, mirrors, chairs and other equipment are separate unless the written quote explicitly includes them.
Have the project’s qualified professionals review applicable accessibility, circulation, fire and sanitary requirements for the actual location. Do not use a visual concept as an installation plan.
What to send for a project quote
- Finished wall dimensions and photos or a dimensioned drawing.
- Number and position of stations, mirrors, chairs and nearby obstructions.
- Desired length, depth and height; preferred wood, finish and edge.
- Storage, cable-management and expected loading needs.
- Wall construction, installation responsibilities, delivery ZIP code and target date.
For a coordinated fit-out, explore the fixed barbershop slat divider and the salon and barbershop collection of project ideas. Send your plans to Family Wood Studio to discuss scope, feasibility and pricing.
Frequently asked questions
How long can a barber console be?
Length depends on the material, construction, supports, access and delivery. Share the full run and station layout; the maker can review whether sections or joints are needed.
Is the console price fixed?
The custom console is priced by quote. Dimensions, wood, storage and installation scope affect the proposal.
Are mirrors and electrical outlets included?
They are not included unless explicitly stated in the quote. Mark their positions so the woodwork can be planned around them.